Extended Search

- in all fields
- in the title
- in key words
- in the abstract
- in the bibliography
Issue
Name
Authors
Category
2018/3
Monitoring of metalworking tool parameters
Technical sciences

Authors: Mikhail Z. KhOSTIKOEV graduated from Moscow Institute of Machine Tool Design in 1969. Doctor of Technical Sciences, professor of the Department of Standardization, certification and quality management of oil and gas equipment production of Gubkin Russian State University of Oil and Gas (National Research University). Specialist in the field of development of theoretical foundations, methods and means for increasing the efficiency of technological processes of machining and improving the quality of threaded joints of pi- pes and couplings of the oil assortment. He is an author of more than 150 scientific publi-cations.
E-mail: khostikoevmz@mail.ru
Dmitry N. LEVITSKY graduated from Gubkin Moscow Institute of petrochemical and gas industry in 1975. Doctor of Technical Sciences, head of the Department of Theoretical Mechanics of Gubkin Russian State University of Oil and Gas (National Research University). Specialist in the field of theoretical mechanics. He is an author of more than 100 scientific publications.
E-mail: levitskiy.d@gubkin.ru
Igor N. KARELIN graduated from Gubkin Moscow Institute of Petrochemical and Gas Industry in 1975. He is Doctor of Technical Sciences, Professor of the Department of Stan- dartization, Certification and Quality Management of Oil and Gas Equipment Manufacturing of Gubkin Russian State University of Oil and Gas (National Research University). He is specialist in the field of methods for ensuring the reliability of oil and gas equipment. He is author of more than 150 scientific publications.
E-mail: karelin-in@mail.ru

Abstract: The results of studies on monitoring of instrument parameters in the process of metal working are considered. On the example of the process of rolling threads with heads of axial and tangential type, it is shown that the tool can self-adjust to geometric and structural parameters during machining, depending on the systematic and accidental errors that occur when machining each part

Index UDK: 621.992.7

Keywords: monitoring, self-adjusting tools, systematic and accidental machining errors, thread rolling

Bibliography:
1. Khostikoev M.Z. Managing the geometry of the tool during processing. Gornyy informa-tsionno-analiticheskiy byulleten’. [Mining Information and Analytical Bulletin], 2011, no. 4, p. 319–321 (in Russian).
2. Khostikoev M.Z. Basics of creating adaptive metalworking tools//Mekhanizatsiya i avtoma-tizatsiya proizvodstva. [Mechanization and automation of production], 1978, no. 11, p. 23–26 (in Rus-sian).
3. Khostikoev M.Z. Calculation of the diameter of the rollers of tangential heads//Stanki i instru-ment. [Machines and tools], 1978, no. 12, p. 24–25 (in Russian).
4. Khostikoev M.Z., Ageeva V.N. Expansion of technological capabilities and efficiency of multi-purpose machines through the use of tangential thread rolling heads in setting up//Gornyy informatsionno-analiticheskiy byulleten’. [Mining Information and Analytical Bulletin], 2016, no. 8, p. 195–199 (in Russian).

2018/2
Processing of long-dimensional threads by rolling
Technical sciences

Authors: Mikhail Z. KHOSTIKOEV graduated from Moscow Institute of Machine Tool Design in 1969. Doctor of Technical Sciences, professor of the Department of Standardization, certification and quality management of oil and gas equipment production of Gubkin Russian State University of Oil and Gas (National Research University). Specialist in the field of development of theoretical foundations, methods and means for increasing the efficiency of technological processes of machining and improving the quality of threaded joints of pipes and couplings of the oil assortment. He is an author of more than 150 scientific publications.
E-mail: khostikoevmz@mail.ru
Vladimir A. TIMIRYAZEV graduated from Mosstankin in 1961. Doctor of Technical Sciences, professor, laureate of the Lenin Prize. Professor of the Department of Manufacturing Engineering of Stankin Moscow State Technological University (Stankin MSTU). Specialist in the field of complex control of the accuracy of technological systems. He is an author of more than 500 scientific publications. E-mail: timwa38@mail.ru
Dmitry N. LEVITSKY graduated from Gubkin Moscow Institute of petrochemical and gas industry in 1975. Doctor of Technical Sciences, head of the Department of Theoretical Mechanics of Gubkin Russian State University of Oil and Gas (National Research University). Specialist in the field of theoretical mechanics. He is an author of more than 100 scientific publications.
E-mail: levitskiy.d@gubkin.ru
Yuri Fedorovich NABATNIKOV is a doctor of Technical Sciences, head of the Department of technology of machine building and repair of mining machines in National University of Science and Technology „MISiS”. Specialist in the field of progressive approaches to production engineering. He is an author of more than 50 scientific publications. E-mail: kaftmr@mail.ru

Abstract: A new method for rolling threads is proposed. This extends the technological possibilities of the thread-rolling process with tangential heads by machining threads that are not limited in length to the rollers, as is the case with tangential heads. This allows to control the size and direction of the working axial feed of the rolling rollers, by varying the diameter and therefore the angle of inclination of the threads of the rollers, which in its turn allows to take into account the specific technological conditions of the processing. This is achieved by the fact that the combination and sequence of the types of working feeds and a new mutual initial setting of the rolling rollers and parts are regulated, which, when co-executed, rolls the threads of unlimited length when using tangential thread rolling heads

Index UDK: 621.992.7

Keywords: rolling of threads, thread-rolling heads, threads of long screwing, rolling of threads of unlimited length

Bibliography:
1. Timiryazev V.A., Khostikoev M.Z. Sposob nakatyvaniya rez’b [Thread rolling method]. Patent RF, no. 2467822, 2011.
2. Loktev A.D., Gushchin I.F., Khostikoev M.Z. General machine-building standards for cutting conditions. Reference book. T.2. M.: Mashinostroenie, 1991, 304 p. (in Russian).
3. Khostikoev M.Z., Kirin N.N., Garibov V.R. General machine-building standards for the machining regimes and the application rate for the application of tangential thread rolling heads, rolling rollers to machine tools and comb mills. M.: NIIMASh, 1984, 57 p. (in Russian).